Wood South Africa (Pty) Ltd invites unemployed graduates to apply for Junior Engineer / Designer Positions.
Location: Johannesburg and Midrand, Gauteng, South Africa
Job Type: Full-Time
Closing Date: Not Specified
This is an entry level role; degree qualified incumbents will typically have less than two years experience. For applicants willing to register as a candidate engineer with the Engineering Council of South Africa and see the process through until finally being register as an Engineering Professional.
The following Engineering Graduate Opportunities are open for applications:
Graduate Piping Engineer
Key Accountabilities & Responsibilities:
- Responsible for ensuring the mechanical integrity and code compliance of all piping designs on assigned projects.
- Prepare project specific standards and job notes.
- Prepare requisition index for special piping items, indicating planned issue date for each requisition and update monthly.
- Prepare general notes requisitions or purchasing requirements for piping.
- Update pipe stress index on a monthly basis.
- Review flowsheets for correctness of depicting piping and material.
- Design and requisition piping special piping items.
- Ensure the technical accuracy of specifications within the 3D design system and maintain relevant reference data, as required.
- Prepare support sketches for the drawing office.
- Prepare and check piping bulk requisitions in conjunction with the MTO group.
- Review all piping drawings and ensure that the quality of design and drawings produced for enquiry and fabrication purposes is of satisfactory standard.
- Prepare technical bid analysis for special piping items.
- Prepare and check piping bulk technical evaluations from the MTO group.
- Attend co-ordination meetings and engineering review meetings with suppliers as required.
- Review document requirements and issue dates for major equipment with suppliers and assist Procurement Department in compiling a Suppliers’ Document Index.
- Assist Procurement Department with the expediting of supplier documents.
- Review supplier documents for piping and distribute.
- Give guidance to Client, Project Engineers, other Specialist Engineers and Inspectors on piping engineering matters. Review piping aspects of package unit suppliers’ drawings, as requested by the Engineer responsible for the equipment.
- Advise the Principal/Senior Piping Engineer of any slippages and their causes and proposed corrective action.
- Advise the Principal / Senior Piping Engineer of any technical problems and unresolved differences with other groups.
- Co-ordinate with Procurement Department and ensure that certified drawings are available in time to meet the engineering schedules.
- Notify the Project Engineer of all deficiencies in the flow of data or other basic information required for execution of work.
- Assist the Principal/Senior Piping Engineer with the monthly progress reports.
- Follow up piping construction work on projects sites to ensure correct interpretation of designs regarding installation. Resolve any piping problems arising during commissioning.
- Keep abreast of developments in the piping engineering field.
- Suggest ways to improve efficiency, costs and service in the execution of projects.
- Assist where necessary in the compilation of operating manuals and mechanical catalogues.
- Perform any other duties assigned by the Principal/Senior Piping Engineer.
Qualifications:
- BSc, BEng, BTech
- None to 2 Years minimum experience
Graduate Mechanical Engineer
Responsibilities:
- Responsible for the engineering of all rotating equipment, mechanical handling and packaged units on assigned projects.
- Responsible for preparation of project related standards and job notes.
- Prepare project specific standards and job notes.
- Prepare requisition index for rotating equipment, mechanical handling and packaged units, indicating planned issue date for each requisition. Update and reissue monthly.
- Prepare general notes requisitions for rotating equipment, mechanical handling and packaged units.
- Review flow sheets for correctness of depicting of rotating equipment, mechanical handling and packaged units, operating and design conditions and piping and instrumentation connections.
- Compile mechanical datasheets and requisition rotating equipment, mechanical handling and packaged units.
Qualifications:
- BSc, BEng, BTech (Mechanical Engineering)
Junior Mechanical Designer
Responsibilities:
- Primarily, undertake 3D CAD design modelling and 2D drafting annotations.
- Modelling of 2D Vendor drawings into 3D Models,
- Detailed design and production of mechanical models and drawings encompassing all aspects of a Mining Processing plant construction package in accordance with relevant standards and project requirements.
- Timely completion of mechanical deliverables to schedules.
- Adherence to project man-hour budgets.
- Adherence to company standards and procedures.
- Miscellaneous tasks such as vendor works inspections, material take-offs, standard drawings, and detail drawings.
- Production of drawings in accordance with established procedures, i.e., internal review, client review, checking, etc.
- Clarity and accuracy of drawings.
- Work closely with consultants, other disciplines, and Project/Study Managers to ensure that client’s objectives are met in a timely manner.
- Ensure compliance and take initiative for safety and environmental issues
Qualifications:
- Tertiary Technical Qualification, (National Diploma etc.)
Graduate Electrical Engineer
Responsibilities:
- Performs a variety of routine tasks that are planned to provide experience and familiarization with the engineering staff and the methods, practices, and programs of the company.
- Assists with the development of technical specifications, calculations, reports, design criteria and other documents required by the project in accordance with project, discipline, statutory regulations, good-practice, and company procedural requirements.
- Participate in the review of design documents and drawings from own discipline and from other disciplines, including the review of vendor documentation for compliance with project specifications.
- Provides straightforward solutions to problems using readily available, clear, and direct references.
- Prepares simple plans and designs, calculations and bills of material in accordance with established specifications.
- Prepares reports on their assignments and makes recommendations on the solution of technical problems within the scope of assignment.
Qualifications:
- BSc, BEng, or B. Tech Graduate
Graduate Mechanical Engineer
Responsibilities:
- To assist with the development of technical specifications, calculations, reports, design criteria and other documents required by the project in accordance with project, discipline, statutory regulations, good-practice, and company procedural requirements.
- To learn about design engineering standards on mining projects.
- Participate in the review of design documents and drawings from own discipline and from other disciplines, including the review of vendor documentation for compliance with project specifications.
- To understand the level of detail of each stage of a project life cycle.
- Participate in factory acceptance tests under the supervision of a senior engineer.
- Understand how man hour estimate are put together and how the business works.
- Ensure compliance and take initiative for safety and environmental issues.
Qualifications:
- BSc, BEng, or B. Tech Graduate
Graduate Instrumentation & Controls Engineer
Responsibilities:
- Performs a variety of routine tasks that are planned to provide experience and familiarization with the engineering staff and the methods, practices, and programs of the company.
- Assists with the development of technical specifications, calculations, reports, design criteria and other documents required by the project in accordance with project, discipline, statutory regulations, good-practice, and company procedural requirements.
- Participate in the review of design documents and drawings from own discipline and from other disciplines, including the review of vendor documentation for compliance with project specifications.
- Provides straightforward solutions to problems using readily available, clear, and direct references.
- Prepares simple plans and designs, calculations and bills of material in accordance with established specifications.
- Prepares reports on their assignments and makes recommendations on the solution of technical problems within the scope of assignment.
Qualifications:
- BSc, BEng, or B. Tech Graduate
How to Apply for Wood South Africa: Junior Engineer
Click on the link on your preferred programme to apply online:
Click here to apply online for Graduate Piping Engineer (Midrand)
Click here to apply online for Graduate Mechanical Engineer (Midrand)
Click here to apply online for Junior Mechanical Designer (Johannesburg)
Click here to apply online for Graduate Electrical Engineer (Johannesburg)
Click here to apply online for Graduate Mechanical Engineer (Johannesburg)
Click here to apply online for Graduate Instrumentation & Controls Engineer (Johannesburg)
CLICK HERE FOR MORE JOB OPPORTUNITIES
If you are a graduates who graduated with 2 years, please download the GradStar App and enrol. On the “how did you hear about us” part, select “ambassador” then enter the ambassador code “STUFNews”
Download the GradStar App, register and enter now to stand a chance to be the next GradStar – featured in front of top employers!
What have you got to lose? Enter now and define your future!
Share the opportunity and never pay for any job / internship / learnership / traineeship / in-service training / bursary opportunities whatsoever – it merely takes you to apply for employment not your money.
If your document size is more than 5MB, visit one of the sites listed below to upload and shrink your documents;
Kindly follow us on our social media platforms
JOIN A RELEVANT WHATSAPP GROUP